Inspection and Certification of lifting tools and tackles are carried out directly by the competent person and/or by a person so authorized by an institution recognised to be a competent person. These inspections are carried out as per the rules prescribed under section 28 and 29 in The Factories' Act, 1948.
We inspect and certify the following lifting tools and tackles:
Inspection and Certification of lifting tools and tackles are carried out directly by the competent person and/or by a person so authorized by an institution recognised to be a competent person. These inspections are carried out as per the rules prescribed under section 28 and 29 in The Factories' Act, 1948.
We inspect and certify the following equipment:
Now a days many old buildings have reduced strength in due course of time. If further use of such deteriorated structure is continued it may endanger the lives of the occupants and surrounding habitation.Thus, it is utmost important to perform structural audit of existing buildings and to implement maintenance/ repair work timely which will lead to prolonged life of the building and safety of the occupant.
Structural Audit is an overall health and performance check-up of a building like a doctor examines a patient.
Why Uniquo?
It involves planning the right equipment, coupled with right place, to permit the processing of a production unit in the most effective manner, through the shortest possible distance and in the shortest possible time.
Plant layout is a mechanism which involves knowledge of the space requirements for the facilities and also involves their proper arrangement so that continuous and steady movement of the production cycle takes place.
Plant layout is primarily concerned with the internal set up of an enterprise in a proper manner.
Plant layout is primarily concerned with the orderly and proper arrangement of the 5Ms of the resources:
Why Uniquo?
"CHECK YOUR TOWER CRANE FROM YOUR OFFICE"
Comprehensive audits of tower crane refer to the in depth checking of the parts and tools used in the tower crane. This helps in knowing the working condition of the parts, their wear and tear, and the Corrective actions needed to be taken to solve them. It also helps in knowing the preventive actions needed to be taken to prevent damage/wear & tear of the machine.
With the help of checklists based on standard format, inspections are carried out and crane is inspected from top to bottom, starting from Earthing at the bottom to lightning arrestor at the top of crane and from counterweights at one side to the front boom end on the other side. Minute details (such as Pins in the mast) are observed and the condition of important parts is noted. Inspections are done by keeping in mind, the safety norms associated with it.
A Report (in .pdf format) is created and all the important points, with their condition are highlighted. Corrective actions, if any, are recommended. Preventive Actions to be taken are also suggested based on the condition of the parts.
PASSENGER MATERIAL HOISTS (PM):
"CHECK YOUR PMH FROM YOUR OFFICE"
Comprehensive audits of PMH refer to the in depth checking of the parts and tools used in it. This helps in knowing the working condition of the parts, their wear and tear, and the Corrective actions needed to be taken to solve them. It also helps in knowing the preventive actions needed to be taken to prevent damage/wear & tear of the machine.
With the help of checklists based on standard format, inspections are carried out and the hoist is inspected from bottom to top, starting from Cage condition at the bottom to Upper Limit Switch at the top of Hoist. Inspections are done by keeping in mind, the safety norms associated with it.
Parts such as safety device, limit switches, rollers, etc. are observed and the condition of important parts such as mast joints is noted.
A Report (in .pdf format) is created and all the important points, with their condition are highlighted. Corrective actions, if any, are recommended. Preventive Actions to be taken are also suggested on behalf of the condition of the parts.
(Checklists can be customized as per customer's requirement).
Other machineries that are used on site and are inspected by us are: