Drop Load Prevention
Identifies damage and overload risks before lifting accessories fail under service conditions.
Lifting Tools & Tackles Inspection Service
Lifting Tools & Tackles Inspection
Safe lifting begins with the integrity of every sling, hook, shackle, and hoist.
The safe use of lifting equipment depends entirely on the integrity of the lifting tools and tackle that carry the load. A single failed sling, cracked hook, or overloaded shackle can result in dropped loads, fatalities, and significant legal liability.
Uniquo provides periodic detailed examination (PDE) of all lifting tools and tackles, as mandated by the Factories Act and IS standards.
Why Inspection Matters
Every lifting accessory is a load path component, not a minor fitting.
Hooks, slings, shackles, hoists, and below-the-hook devices must be examined for wear, deformation, damage, mis-rating, and misuse. Independent inspection helps prevent load drops and strengthens statutory compliance.
Compliance Support
Periodic detailed examination supports Factories Act obligations and internal lifting safety control.
Operational Assurance
Delivers clear findings so defective accessories can be quarantined before they create site incidents.
Lifting Items Inspected
08 Categories
Inspection coverage across slings, fittings, lifting beams, hoists, and below-the-hook devices.
Wire Rope Slings
Single-leg, multi-leg, and grommet configurations.
Chain Slings
Grade 80 and Grade 100 sling systems.
Webbing and Round Slings
Polyester, nylon, and aramid synthetic sling types.
Shackles and Hooks
Shackles, hooks, rings, swivels, and master links.
Lifting Beams
Spreader beams, lifting beams, and lifting frames.
Hoists and Blocks
Chain blocks, lever hoists, and electric wire rope hoists.
Hook Blocks
Hook blocks used on overhead cranes and lifting systems.
Below-the-Hook Devices
Load-handling attachments and purpose-built lifting devices.
Key Checks
Marking, deformation, wear, corrosion, and visible integrity checks across the full lifting
path.
Key Checks
What our inspectors verify during detailed examination.
SWL Marking
Present, legible, and correctly rated for the intended lifting application.
Wire Rope Condition
Broken wires per lay, corrosion, kinks, and bird-caging.
Chain Link Integrity
Stretch, wear, deformation, and crack indicators on chain links.
Synthetic Sling Damage
Cuts, abrasion, and heat or chemical damage on soft lifting slings.
Hook Condition
Cracks, deformation, throat opening, and safety latch condition.
Need periodic detailed examination for lifting tools and tackles at your site?
Connect with UNIQUO for lifting accessory inspection, SWL verification, defect identification, and compliance-focused examination reporting.